Welcome, Guest
Username: Password: Remember me

TOPIC: B25 project

B25 project 10 years 2 months ago #776

  • smith
  • smith's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 71
  • Thank you received: 8
  • Karma: 6
this bike has had me chasing my tail trying to figure out why it leaks oil at the shift shaft
unlike asian bikes there is no seal here because there should be no oil here so I pull the outer cover and about 8 oz of oil come dumping out
after attempting to clean the area along the bottom and I find the reason why there is oil here
if this was easy,everyone would do it
The administrator has disabled public write access.

B25 project 10 years 2 months ago #777

  • smith
  • smith's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 71
  • Thank you received: 8
  • Karma: 6
b25oilleak.jpg
if this was easy,everyone would do it
The administrator has disabled public write access.

B25 project 9 years 3 months ago #1046

  • firebirdman
  • firebirdman's Avatar
  • OFFLINE
  • Junior Boarder
  • Posts: 34
  • Karma: 0
If you look at a picture of last year OVBSAOC raffle bike closely (I use a magnify glass) it look like some king of replacement cards on that one too. Definity not Amal carbs, I would say. Someone tell my uncle up at Medina they herd that raffle bike run - the 2014 raffle bike A50 Cyclon - and it sounded real good, so them replacement carbies must be OK
The administrator has disabled public write access.

B25 project 9 years 3 months ago #1047

  • firebirdman
  • firebirdman's Avatar
  • OFFLINE
  • Junior Boarder
  • Posts: 34
  • Karma: 0
Some JB Welder might be useful here, just for a quik repair of coarse
The administrator has disabled public write access.

B25 project 9 years 3 months ago #1055

  • smith
  • smith's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 71
  • Thank you received: 8
  • Karma: 6
leak was repaired w/ JB but that bike had more issues than playboy so it came apart as was the original reason I bought it for spares for my triumph and I need another bike like I need (fill in blank) it was a fun project but never really had a place in my garage
if this was easy,everyone would do it
The administrator has disabled public write access.

B25 project 9 years 2 months ago #1065

  • OhioTed
  • OhioTed's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 454
  • Thank you received: 11
  • Karma: 2
Steve,

I'm looking for a cheapie Kehin-replacement for my one SL Honda. Who's your source?
Never met a motorcycle I didn't like.
Last Edit: 9 years 2 months ago by OhioTed.
The administrator has disabled public write access.
Time to create page: 0.080 seconds
Powered by Kunena Forum