Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Exhaust pipes

Exhaust pipes 9 years 4 months ago #347

  • wrconaway
  • wrconaway's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
Having trouble getting a set of exhaust pipes to fit a 1969 A50. Have had to return 4 sets to 2 different distributors because of bad fit left hand side. The right side bolts up like it has eyes, but the pipes for the right side are all about an inch too low where they run under the primary chain case. Anyone else had this problem.
The administrator has disabled public write access.

Exhaust pipes 9 years 4 months ago #355

  • clarkthespark
  • clarkthespark's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 91
  • Thank you received: 13
  • Karma: 6
This is a very common problem encountered these days. Some of the re-production parts just fit so poorly. Often, the best thing to do is get the original pipes re-chromed, if they are not badly dented. Small dents can be worked out with patience (best done after the chrome has been removed). Let me check with my supplier to see how his pipes fit, and see if it is possible to buy only one pipe, and I'll try to get back to you.
The administrator has disabled public write access.
The following user(s) said Thank You: OhioTed

Exhaust pipes 9 years 3 months ago #375

  • clarkthespark
  • clarkthespark's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 91
  • Thank you received: 13
  • Karma: 6
Checked with my supplier, and he is having some pipes made up, but he does not know when he will have any to offer for sale. As for selling single pipes, he does not do it. You have to buy a set of them. Sorry. Best thing you can do is look for an original set that just needs rechromed, and go that way.
The administrator has disabled public write access.
  • Page:
  • 1
Time to create page: 0.073 seconds
Powered by Kunena Forum